Project control category
Tubular motor selection for projects that need multiple motors coordinated through switches, relays, controllers or receiver systems after wiring logic is confirmed.
- 23+ years manufacturing experience
- OEM/ODM motor programs
- Global export support
- Certificates confirmed by model and market
Parallel control should be engineered around the actual wiring and controller plan. This page avoids promising a universal wiring method and focuses on the data Walter needs before recommending motor families.
Buyer shortcut
Quick Selection
Diameter
- 35mm
- 45mm
- 59mm by load
Power type
- AC wired
- DC or battery only after controller review
Limit type
- Mechanical limit
- Electronic limit where control logic requires it
Control type
- Switch groups
- Relay/controller systems
- Receiver groups after transmitter confirmation
Application
- Multi-blind projects
- shutter banks
- commercial shading
Model path
Recommended Models
YYGL35S
- Diameter
- 35mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- AC configuration by market
- Power
- AC
- Limit
- Mechanical limit
- Control
- Switch / project control
Simple wired blinds or light shutter projects where mechanical limit adjustment is preferred.
Confirm torque, voltage and accessory set before order.
YYGL35R
- Diameter
- 35mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- AC configuration by market
- Power
- AC
- Limit
- Mechanical limit
- Control
- Built-in RF receiver
35mm remote-control projects that need an integrated RF receiver.
Confirm transmitter frequency, pairing and market configuration.
YYGL45S
- Diameter
- 45mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- AC configuration by market
- Power
- AC
- Limit
- Mechanical limit
- Control
- Switch / project control
Standard 45mm wired applications including awnings, zip screens and shutters.
Use project size and load to confirm final torque.
YYGL45R
- Diameter
- 45mm
- Torque
- 10-50Nm range shown on current product page
- Speed
- confirm by torque version
- Voltage
- 230V/50Hz shown on current product page
- Power
- AC
- Limit
- Mechanical limit
- Control
- Built-in RF receiver
Remote-control awnings, shutters and screens where a 45mm receiver motor fits.
Confirm RF transmitter, frequency and torque version before order.
YYGL45E
- Diameter
- 45mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- AC configuration by market
- Power
- AC
- Limit
- Electronic limit
- Control
- Built-in receiver / project control
45mm electronic limit projects needing receiver control or more precise end-position setup.
Confirm control logic, transmitter and accessory compatibility.
Spec screen
Technical Comparison
| Model | Diameter | Power | Limit | Control | Best RFQ fit |
|---|---|---|---|---|---|
| YYGL35S | 35mm | AC | Mechanical limit | Switch / project control | Simple wired blinds or light shutter projects where mechanical limit adjustment is preferred. |
| YYGL35R | 35mm | AC | Mechanical limit | Built-in RF receiver | 35mm remote-control projects that need an integrated RF receiver. |
| YYGL45S | 45mm | AC | Mechanical limit | Switch / project control | Standard 45mm wired applications including awnings, zip screens and shutters. |
| YYGL45R | 45mm | AC | Mechanical limit | Built-in RF receiver | Remote-control awnings, shutters and screens where a 45mm receiver motor fits. |
| YYGL45E | 45mm | AC | Electronic limit | Built-in receiver / project control | 45mm electronic limit projects needing receiver control or more precise end-position setup. |
Electrical review
Wiring Logic for Parallel Control
Do not directly parallel standard motors unless approved
Multi-motor systems usually need an approved relay module, group controller, receiver group logic or building controller. Directly wiring several standard tubular motors to one switch can create feedback current, limit conflict or protection risk. Final wiring must be confirmed by the project electrician or controller provider.
Selection logic
Buyer Guide
Start with the wiring diagram
Parallel control depends on switch, relay, controller and motor wiring. Send a diagram or controller specification before model confirmation.
Do not parallel motors blindly
Multiple motors on one control circuit may need relays or proper control hardware. Final wiring should follow the approved electrical design.
Choose limit type by commissioning need
Mechanical limit is practical for simple grouped systems. Electronic limit can be reviewed when setting or control workflow requires it.
Confirm local voltage and rules
Voltage, frequency, cable, plug, switching method and target market should be confirmed before samples.
Where it fits
Applications
Motorized roller blinds
Multi-window blind projects and group control planning.
View applicationMotorized roller shutter
Grouped shutter control with proper wiring review.
View applicationMotorized venetian blinds
Coordinated facade shading after lift and tilt needs are known.
View applicationSupplier proof
Why Walter
- 23+ years focused on tubular motor manufacturing and application support.
- OEM/ODM support for labels, packaging, accessories and private programs.
- Model selection help based on tube size, load, voltage, control method and target market.
- Quality control process for motor assembly, accessories and order consistency.
- Export documentation and certification review are handled by exact model and destination market.
- Walter can review project control requirements together with motor family, accessories and sample approval steps.
Visible answers
FAQ
What does parallel control motor mean for Walter pages?
It describes motor selection for projects where multiple motors are controlled through switches, relays, controllers or receiver groups after wiring logic is confirmed.
Can multiple tubular motors share one switch?
This depends on motor type, electrical design and controller hardware. Use proper relay or control equipment where required; do not assume direct parallel wiring is acceptable.
Which limit type is best for group control?
Mechanical limit can work for simple systems, while electronic limit may be reviewed when commissioning or control behavior needs it.
Can receiver motors be used for group control?
Receiver motors can support grouped remote-control projects when transmitter channels, pairing and frequency are confirmed.
What should I send before a parallel control quote?
Send application, number of motors, wiring diagram, controller type, voltage, tube size, load, limit preference and market requirement.
Does Walter provide wiring engineering?
Walter can support motor and accessory selection, but final site electrical design should be reviewed by the project electrician or controller provider.
Internal links
Related Categories
Send a parallel control motor RFQ
Walter Motor can review the application before quoting so the motor, control method, accessory kit and market requirements are aligned.
- application
- tube size
- load, fabric weight or blind size
- voltage
- control method
- limit type
- quantity
- target market
- certification requirement
- OEM branding requirement
