Blind and facade shading
Motor selection support for venetian blind systems where lift load, headrail space, tilt behavior, control method and project environment must be checked together.
- 23+ years manufacturing experience
- OEM/ODM motor programs
- Global export support
- Certificates confirmed by model and market
Venetian blind systems are not selected only by tube diameter. Buyers should confirm the complete blind mechanism, lift and tilt requirements, headrail space and control expectation before motor quotation.
Buyer shortcut
Quick Selection
Diameter
- Project-specific headrail and drive space
- 35mm or 45mm tubular alternatives only when mechanism allows
Power type
- AC
- DC or battery by system design
Limit type
- Mechanical or electronic limit by mechanism
- confirmed tilt/lift control need
Control type
- Switch
- RF receiver
- smart controller after protocol confirmation
Application
- Indoor venetian blinds
- outdoor venetian blinds
- facade shading
Model path
Recommended Models
YYGL35S
- Diameter
- 35mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- AC configuration by market
- Power
- AC
- Limit
- Mechanical limit
- Control
- Switch / project control
Simple wired blinds or light shutter projects where mechanical limit adjustment is preferred.
Confirm torque, voltage and accessory set before order.
YYGL35R
- Diameter
- 35mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- AC configuration by market
- Power
- AC
- Limit
- Mechanical limit
- Control
- Built-in RF receiver
35mm remote-control projects that need an integrated RF receiver.
Confirm transmitter frequency, pairing and market configuration.
YYGL35E
- Diameter
- 35mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- AC configuration by market
- Power
- AC
- Limit
- Electronic limit
- Control
- Built-in receiver / project control
Electronic limit projects in 35mm tubes where receiver control is required.
Confirm the exact receiver and control logic before quotation.
WM35DS
- Diameter
- 35mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- 12V DC battery / solar configuration
- Power
- DC battery / solar
- Limit
- Electronic limit
- Control
- Wireless receiver compatible
35mm wire-free shading systems where battery or solar-assisted operation is required.
Current category data is normalized to WM35DS; confirm any legacy naming before use.
YYGL45S
- Diameter
- 45mm
- Torque
- model-dependent
- Speed
- confirm by version
- Voltage
- AC configuration by market
- Power
- AC
- Limit
- Mechanical limit
- Control
- Switch / project control
Standard 45mm wired applications including awnings, zip screens and shutters.
Use project size and load to confirm final torque.
YYGL45R
- Diameter
- 45mm
- Torque
- 10-50Nm range shown on current product page
- Speed
- confirm by torque version
- Voltage
- 230V/50Hz shown on current product page
- Power
- AC
- Limit
- Mechanical limit
- Control
- Built-in RF receiver
Remote-control awnings, shutters and screens where a 45mm receiver motor fits.
Confirm RF transmitter, frequency and torque version before order.
Spec screen
Technical Comparison
| Model | Mechanism fit | Headrail review | Lift / tilt behavior | Power | Control | Project notes |
|---|---|---|---|---|---|---|
| YYGL35S | Candidate path only | Required | Lift or drive behavior depends on mechanism | AC | Switch / project control | Do not treat as universal venetian motor. |
| YYGL35R | Candidate RF path only | Required | Lift or drive behavior depends on mechanism | AC | RF receiver | Confirm transmitter and complete headrail assembly. |
| YYGL35E | Candidate electronic path only | Required | Electronic limit may help only if mechanism matches | AC | Receiver / controller by version | Confirm setting method and tilt behavior. |
| WM35DS | Candidate battery path only | Required | Load-dependent, mechanism-dependent | DC battery / solar | Wireless receiver compatible | Use only after lift load and charging review. |
| YYGL45S | Heavy candidate path only | Required | Mechanism-dependent | AC | Switch / project control | May be oversized for many indoor headrails. |
| YYGL45R | Heavy RF candidate path only | Required | Mechanism-dependent | AC | RF receiver | Confirm noise, headrail and accessory fit by sample. |
Mechanism first
Lift vs Tilt Review
| Requirement | What to confirm | Motor implication |
|---|---|---|
| Lift only | Blind weight, ladder/tape path, headrail room and stop points. | Candidate tubular or drive path can be reviewed after drawings. |
| Tilt only | Slat angle range, torque need, backlash and control precision. | Do not assume a rolling tubular motor fits tilt-only systems. |
| Lift + tilt | Combined movement logic, controller sequence and user control method. | Often needs mechanism-specific review before model selection. |
| Facade venetian blinds | Outdoor exposure, wind, bracket access and maintenance path. | Review as a full facade shading system, not a generic blind. |
Selection logic
Buyer Guide
Confirm the blind mechanism
Venetian blind motor selection depends on headrail structure, lift path, tilt requirement and available motor space.
Separate lift and tilt requirements
Some projects need both lifting and slat angle control. The control method must be confirmed before recommending a motor.
Check outdoor environment
Outdoor venetian blinds may need stronger margin and weather-specific accessory review. Confirm exposure, mounting and service access.
Sample-test the complete system
Noise, movement, limit behavior and accessory fit should be approved in the final blind assembly before batch order.
Where it fits
Applications
Motorized venetian blinds
Verified application page for venetian blind systems.
View applicationMotorized roller blinds
Related indoor blind and shade motor selection.
View applicationMotorized awning
Outdoor shading comparison for facade projects.
View applicationSupplier proof
Why Walter
- 23+ years focused on tubular motor manufacturing and application support.
- OEM/ODM support for labels, packaging, accessories and private programs.
- Model selection help based on tube size, load, voltage, control method and target market.
- Quality control process for motor assembly, accessories and order consistency.
- Export documentation and certification review are handled by exact model and destination market.
- Walter can review venetian blind mechanism details with drawings, photos or samples before recommending a motor path.
Visible answers
FAQ
Can a tubular motor be used for venetian blinds?
It depends on the venetian blind mechanism, headrail space and drive design. Send drawings or samples before selection.
What is different about venetian blind motor selection?
Venetian blinds may require lift and tilt behavior, not only rolling torque. The complete mechanism must be reviewed.
Can venetian blind motors use smart control?
Smart control may be possible only when the selected motor and controller support the required behavior and protocol.
What information is needed for venetian blind RFQ?
Send headrail details, blind size, lift weight, tilt requirement, voltage, control method, quantity and target market.
Are outdoor venetian blinds different from indoor blinds?
Yes. Outdoor systems may have stronger load, exposure and accessory requirements. They should be checked as complete systems.
Can Walter support OEM venetian blind projects?
Walter can review motor options, accessories, labels, manuals and packaging after the mechanism and control requirements are clear.
Internal links
Related Categories
Send a venetian blinds motor RFQ
Walter Motor can review the application before quoting so the motor, control method, accessory kit and market requirements are aligned.
- application
- tube size
- load, fabric weight or blind size
- voltage
- control method
- limit type
- quantity
- target market
- certification requirement
- OEM branding requirement
